Our plain, lined and coated and micro tunneling reinforced concrete pipes are either machine-made or manufactured using the wet-cast and dry-cast method. RC pipes are designed to withstand large external and axial loads for trench and micro tunneling operations respectively.
Our pipes will not collapse, crack, buckle or deflect under the impact of imposed heavy loads. Simple and economical to install, our RCP pipes do not need specialback fill material. Our RCP pipes are used for storm drains, sanitary sewers,effluent, culverts, industrial discharge lines and micro tunneling operations.
RC pipes are produced in diameters ranging from 300mm to 3500mm in addtion to manholes with different diameters range as per customer request.
|Length||2.5m , 3m|
Reinforced Concrete (RC) Pipe is recognized by Engineers, Contractors and specifying agencies as the most resistant and economic of all piping products. RC Pipes are specifically designed and used for the following many uses:
RC Pipes are the strongest pipe
available in the market. It can be designed and plant tested to resist any live and dead load required. It relies primarily on its inherent brute strength manufactured into the pipe.
RC Pipes are most durable and long-lasting pipe
that has been extensively used for underground usage throughout the globe. Properly installed, the service life for concrete culverts, storm sewer and sanitary sewer can exceed more than 100 years.
RC Pipes have an ultra-smooth interior wall surface
which means the capacity specified is the capacity achieved.
RC Pipes require little or no maintenance and offers
the greatest long-term value.
RC Pipes are not combustible
and therefore will not hold flame after fire has been introduced into the drainage system.
These specifications cover reinforced concrete pipe intended to be used for the transmission of storm sewers, storm waters, industrial waste, and for the construction of the culverts: